Gridfinity STL files

Gridfinity screw organizer

Gridfinity screw organizer bin with divider grooves in the long walls, magnet and screw holes under the feet, and three separate removable divider plates tha…

Gridfinity scissors holder

2x1 Gridfinity holder with magnet holes: a 50 mm block with two angled 4x70 mm scissor-blade slots and a round craft-knife cup.

Gridfinity hex key holder

2x1 Gridfinity bin with seven hex sockets for 1.5 to 6 mm keys (0.3 mm oversize, 18 mm deep), raised size labels and a magnet base.

Gridfinity drawer

Gridfinity drawer built as a 3 x 4 gridfinity_bin, 6 units (42 mm) tall, with top flanges that ride on two separate 180 mm desk-mount rails and an optional 4…

Gridfinity 1×1 bin

1x1 Gridfinity bin, 6 units tall, with four 6.1 mm magnet pockets, an optional front label tab and an optional separate press-fit lid.

Gridfinity 2×1 bin

2x1 Gridfinity bin, 3 units tall, with a stacking lip, magnet pockets, a front label tab and a separate flat lid that seats in the lip.

Gridfinity 2×2 bin

2x2 Gridfinity bin, 6 units tall, with 1.2 mm walls, stacking lip, engraved front label and four midline grooves. A separate plus-shaped cross divider drops…

Gridfinity baseplate for IKEA Alex

Two separate 3x6-cell Gridfinity baseplate tiles, side by side, that together fill a 252x252 mm Alex drawer, with optional magnet pockets.

Gridfinity baseplate

5×4 Gridfinity baseplate, 4.4 mm thick, with optional 6.1 mm magnet pockets and optional 24 mm steel-weight pockets under every cell.

Gridfinity battery tray

2x3 Gridfinity battery tray with twelve 14.8 mm AA pockets in a 4x3 grid, raised + and - marks, magnet holes under the base, and a separate insert with eight…

Gridfinity 3×2 bin

3x2 Gridfinity bin, 6 units tall, 1.2 mm walls, stacking lip, magnet holes and a sloped label tab on the inside of the front wall.

Gridfinity bin lid

Gridfinity 2x1 lid with a stacking-lip seat on the underside, a half-round finger notch on one long edge, and an optional label recess.

Gridfinity SD card holder

1×1 Gridfinity solid bin, 6 units tall, with eight 2.4×24 mm SD slots and twelve 1.2×11 mm microSD slots 8 mm deep, labelled by two raised bars.

Gridfinity nozzle holder

1x2 Gridfinity block with two rows of six M6 nozzle pockets, a central 10 mm wrench trough and base magnet pockets.

Gridfinity socket organizer

4x2 Gridfinity tray with two rows of five 3/8 in drive posts, 12 mm tall, engraved with the socket sizes 10 to 19 mm, and magnet pockets.

Gridfinity phone stand

Gridfinity 2x1 phone stand with a 65 degree backrest, an 8 mm front lip split by a 10 mm cable slot, and magnet pockets in the base.

Gridfinity headphone stand

Gridfinity 2x2 base bin, 10 units tall, with magnet pockets and a through dovetail slot, plus a separate 160 mm tower with a 70 mm U-yoke and a dovetail teno…

Gridfinity rugged case

Rugged Gridfinity case: 180x140x90 overall, with a 180x132x90 shell (the 8 mm pivot pins bring the front to 140), a 4x3 baseplate inside, a lid with a gasket…

Gridfinity pen cup

2x2 Gridfinity pen cup, 12 units tall, 1.2 mm walls, open top, no stacking lip, magnet pockets in the feet.

Gridfinity cable bin

A 2x2 Gridfinity bin, 6 units tall, plus a separate 8-slot cable comb (7 mm slots) that snaps onto the front lip.

multiboard gridfinity

Multiboard Gridfinity shelf

Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.

opengrid gridfinity

openGrid Gridfinity shelf

openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.