3D print
Prompt that made this
Gridfinity 4×2 socket tray, 168 × 84 mm, 3 units tall. Two rows of 3/8 in clips: ten 10–19 mm metric posts, 12 mm tall, 1.2 mm walls, labelled. Magnet pockets.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Workshop drawer organiser for ten metric 3/8 in drive sockets, 10 to 19 mm.
The tray seats in a Gridfinity baseplate through its spec feet and is held by magnets. Each socket slides onto a 3/8 in drive post. The engraved number in front of each post says which socket size belongs there.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Gridfinity screw organizer
Gridfinity screw organizer bin with divider grooves in the long walls, magnet and screw holes under the feet, and three separate removable divider plates tha…
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity 3×2 bin
3x2 Gridfinity bin, 6 units tall, 1.2 mm walls, stacking lip, magnet holes and a sloped label tab on the inside of the front wall.
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity phone stand
Gridfinity 2x1 phone stand with a 65 degree backrest, an 8 mm front lip split by a 10 mm cable slot, and magnet pockets in the base.
ModelForkCommunity
Gridfinity battery tray
2x3 Gridfinity battery tray with twelve 14.8 mm AA pockets in a 4x3 grid, raised + and - marks, magnet holes under the base, and a separate insert with eight…