Free
$0
- 75 credits / month, about 5 designs
- STL, 3MF, OBJ, GLB, and cut SVG
- 1 reference-photo design / month
- Projects are public
- Sliders and re-cuts never spend credits
VoloomVoloom3D printing3D printingLaserLaser cuttingCNCCNC routing
Laser-cut models from a sentence.
Describe a box, a tray, or a frame. Voloom lays out the panels, cuts the joints for your stock, and gives you an SVG for the laser. You see the model assembled. The file is what the machine cuts.
75 credits a month on the free plan, about 5 designs. No card.
Gallery
Every model here was generated in Voloom. Open one and fork a copy.
LaserForkIKEA Skådis organizer tray with dividers
Shorter open tray with dividers, hung on a Skadis board by two hooked side brackets that curve down to a low front.
LaserForkIKEA Skådis bin
An open tray on two hooked side brackets that hang on an IKEA Skadis board, with a floor, a front wall and a back wall.
LaserForkSkådis thread spools holder
Hang-on comb plates for an IKEA Skadis board; each plate has hooks that drop into the pegboard slots and sloped blade pegs with rounded corners that carry th…
LaserForkAdvent calendar
Finger-jointed frame with 24 numbered drawers in a 6 x 4 grid and a tree-cutout header board on top.
LaserForkGift box with lift off lid
120×120×80 mm finger-jointed open box with a separate lid. Four strips on the lid's underside form a locating lip, and the top is engraved with a snowflake a…
LaserForkT rex skeleton puzzle
A slot-together T-rex skeleton about 300 mm long, with a larger toothed open-jawed skull, a long tapering tail, bent-knee legs and three-toed feet that stand…
LaserForkFinger jointed desktop organizer
Finger-jointed desktop organizer with a front-open carcass, two tabbed shelves and three open-top drawers, each with a finger-pull slot.
LaserForkPitched roof birdhouse
Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…
LaserForkLaser cut toy roadster
Thirteen parts cut from 3 mm birch plywood: a chassis, axle bars, four wheels, body sides, a seat back, a windshield, and grille and tail plates.
LaserForkCross leg stool
Round stool with two cross-slotted X legs, a ring at the feet tying them together, and a round seat tabbed into the leg tops.
LaserForkRound lantern
A two-storey round lantern with a double candle door (two leaves, each hinged on top and bottom pins at its outer side), a diamond cross-hatch lattice with s…
LaserForkPhone stand 60°
Two profiled side plates with a front lip and a 60° back slope, tied together by three tabbed cross bars, one of which has a cable window.
LaserForkModel windmill
Cylindrical-style tower of tabbed wall strips with a small windowed cupola on the lid and a spinning four-paddle sail on a dowel axle through the front and b…
LaserForkplasma cut sign
Plasma cut name sign
Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
LaserForklaser cut tray
Laser cut serving tray
Laser cut serving tray as a parametric cut file. Set the stock and size, then download the SVG or DXF.
LaserForklaser cut organizer
Laser cut desk organizer
Laser cut desk organizer as a parametric cut file. Set the stock and size, then download the SVG or DXF.
How it works
A sentence in. An assembled model out.
Three steps from a sentence to a model the laser can cut.
01
Describe the model
A box with a lid, a tray with six compartments, a frame for a sign. Give the sizes in millimetres. No drawing to start from.
A sentence
02
Get cut sheets
Voloom lays out the panels, cuts finger joints, tabs, and slots for your stock, and nests the panels on the sheet.
Joints from the overlap
03
Set the thickness, download SVG
Change the material thickness and every joint recuts, without spending credits. Download the SVG and send it to the laser.
SVG for the machine
Who it is for
Built for people who have a laser and a model to assemble.
Boxes, trays, frames, lanterns, and organizers, cut from one sheet thickness.
Desktop laser owners
A box, a tray, a jig. Describe it, pick the plywood thickness, and send the SVG to the machine.
Small-batch sellers
Ornaments, lanterns, and gift boxes you sell by the dozen. Change a size, recut the batch, and the joints still fit.
Flat-pack prototypes
Change the width or the number of drawers and the panels recut. The same evening, a new SVG.
Product studios
A parametric cut file to start from, with finger joints, tabs, and slots sized for the stock.
What you get
A model you assemble, and the file the laser runs.
The browser shows it assembled. The download is the SVG.
Panels that fit
Finger joints, tabs, and slots are cut from where the panels overlap. You place the panels. The joinery is computed.
One thickness, every joint
Set the stock from 1 mm to 25 mm. Every finger and slot recuts for that sheet. It does not spend credits.
SVG for the laser
Download the cut file and send it to the machine. The browser shows the model assembled, so you can see how it goes together.
Every change is a version
Prompt again or move a size and you get a new revision. Share any of them with a link.
Pricing
Start free. Prices are per month. Yearly is the lower rate, billed once a year. A design costs about 15 credits, and you pay what it used. Monthly credits reset each month. A $10 top-up adds 350 credits that do not expire.
Maker
$12$9.58 / month
Billed annually at $115. Save 20%.
- 500 credits / month, about 33 designs
- STEP and BREP export
- Private projects
- Up to 8 reference images per design
Pro
$29$23.25 / month
Billed annually at $279. Save 20%.
- 1,500 credits / month, about 100 designs
- Everything in Maker
- Lowest price per credit
Need more without a plan? 350 credits for $10, about 23 designs. They do not expire.
Buy 350 credits