Laser cut
Phone stand 60°
By Byteworks
Two profiled side plates with a front lip and a 60° back slope, tied together by three tabbed cross bars, one of which has a cable window.
Prompt that made this
A phone stand that holds a phone at 60 degrees: two side plates with a lip to catch the phone, joined by three cross bars, with a notch for the charging cable.
Made in Voloom from the prompt under the model. Download the cut sheets as they are, or fork a copy to change the material thickness and every size on the right — the joints re-cut to fit, without spending credits.
Make it fit your stock
Measure your sheet first. In the editor, set the thickness to match and every slot and tab re-cuts to fit. Change the sheet size and the parts nest again. Neither spends credits.
Download an SVG per sheet and send it to your laser cutter.
More to make
ModelForkCommunity
Pixel 7 case
Snap-on phone case for a Pixel 7 with a front retaining lip, a shallow back recess framed by a raised perimeter rim, a camera bar window, side button slots a…
ModelForkCommunity
Pixel 11 pro wall mount
Wall-mounted cradle for a Google Pixel 11 Pro with a back plate, side walls, a bottom shelf with a front retaining lip, and a cable slot through the shelf an…
ModelForkCommunity
Samsung Galaxy A07 phone case
One snap-fit part with retaining lips, a camera window, a side button slot and a port slot at the bottom.
ModelForkCommunity
Iphone 18 pro max case
Snap-on phone case for a large 6.9-inch class phone, with a screen lip, a camera cutout, side button slots, and USB-C and speaker openings.
ModelForkCommunity
Pixel 11 pro bumper
Open-back bumper case for the Google Pixel 11 Pro that wraps the edges, with front and back retaining lips and cutouts for the USB-C port and side buttons.