Toys, models and decorations

name sign

Laser cut name sign

Laser cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.

Rover chassis

3D-printable four-motor rover chassis: a 180x120x4 plate with four half-saddles at the corners, BTS7960 and ESP32 standoff pads, a 150x60 battery tray with s…

Pipped die

A 22 mm die with 3 mm rounded edges and 1 to 6 recessed pips per face, each 0.8 mm deep.

Three arm fidget spinner

Three-arm fidget spinner, 7 mm thick, 75 mm tip to tip, shown assembled: two 22 mm finger caps sit on either face of the centre bearing seat and screw into e…

Castle dice tower

Castle-style dice tower: four round corner turrets, battlements (merlons) around the open top and arrow-slit windows, with the same internal baffles, front e…

Treasure chest

Treasure chest with a hollow base, a barrel-vault hollow lid, metal straps, and a lock plate with a hasp.

Lego minifig head

Minifigure-style head: a cylinder with a hollow underside for the neck, eye and smile recesses on the front, and a hollow stud on top.

Clippy

Flat Clippy-style paperclip split into separate colour parts: wire body, two eye domes, two pupils and two eyebrows raised up in Z above the wire, each print…

House model

Flat-pack house with a tall gabled main block, a lower gabled side wing, an arched six-pane window, ventilation holes, engraved doors and a four-panel chimne…

Eiffel tower

Eiffel tower with real proportions: platforms at 17% and 35% of the height, a slender concave profile, an arched first section, a top deck at 84% and a taper…

Duomo di Milano

Flat-pack model of Milan Cathedral: a finger-jointed nave with a portalled facade, a stepped gable, two rows of pinnacles and a tall crossed central spire.

Large D20

Twenty-sided die (icosahedron) made of 20 equilateral triangle panels with clipped corners, finger-jointed along all 30 edges.

T rex skeleton puzzle

A slot-together T-rex skeleton about 300 mm long, with a larger toothed open-jawed skull, a long tapering tail, bent-knee legs and three-toed feet that stand…

Pitched roof birdhouse

Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…

Laser cut toy roadster

Thirteen parts cut from 3 mm birch plywood: a chassis, axle bars, four wheels, body sides, a seat back, a windshield, and grille and tail plates.

Model windmill

Cylindrical-style tower of tabbed wall strips with a small windowed cupola on the lid and a spinning four-paddle sail on a dowel axle through the front and b…