3D print
Prompt that made this
Lego head
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Toy building-block minifigure head, FDM printable
The cylindrical head sits on a neck post via the underside cavity and carries a standard stud on top for hats and hair.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Rover chassis
3D-printable four-motor rover chassis: a 180x120x4 plate with four half-saddles at the corners, BTS7960 and ESP32 standoff pads, a 150x60 battery tray with s…
LaserForkLaser cut
Eiffel tower
Eiffel tower with real proportions: platforms at 17% and 35% of the height, a slender concave profile, an arched first section, a top deck at 84% and a taper…
ModelForkCommunity
Three arm fidget spinner
Three-arm fidget spinner, 7 mm thick, 75 mm tip to tip, shown assembled: two 22 mm finger caps sit on either face of the centre bearing seat and screw into e…
LaserForkLaser cut
T rex skeleton puzzle
A slot-together T-rex skeleton about 300 mm long, with a larger toothed open-jawed skull, a long tapering tail, bent-knee legs and three-toed feet that stand…
ModelForkCommunity
Castle dice tower
Castle-style dice tower: four round corner turrets, battlements (merlons) around the open top and arrow-slit windows, with the same internal baffles, front e…
LaserForkLaser cut
Model windmill
Cylindrical-style tower of tabbed wall strips with a small windowed cupola on the lid and a spinning four-paddle sail on a dowel axle through the front and b…