Model windmill

By Byteworks

Cylindrical-style tower of tabbed wall strips with a small windowed cupola on the lid and a spinning four-paddle sail on a dowel axle through the front and back walls.

Laser
svg
Customize for free
Model windmill, laser-cut design

Cut settings: 3 mm birch plywood · A1 landscape · 1 sheet · 14.3 m of cut

Prompt that made this

Functioning model windmill

Open the model

Made in Voloom from the prompt under the model. Download the cut sheets as they are, or fork a copy to change the material thickness and every size on the right — the joints re-cut to fit, without spending credits.

Make it fit your stock

Measure your sheet first. In the editor, set the thickness to match and every slot and tab re-cuts to fit. Change the sheet size and the parts nest again. Neither spends credits.

Download an SVG per sheet and send it to your laser cutter.

More to make

  • Pitched roof birdhouse, laser-cut designLaserFork

    Laser cut

    Pitched roof birdhouse

    Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…

  • Castle dice tower, 3D printable modelModelFork

    Community

    Castle dice tower

    Castle-style dice tower: four round corner turrets, battlements (merlons) around the open top and arrow-slit windows, with the same internal baffles, front e…

  • Large D20, laser-cut designLaserFork

    Laser cut

    Large D20

    Twenty-sided die (icosahedron) made of 20 equilateral triangle panels with clipped corners, finger-jointed along all 30 edges.

  • Three arm fidget spinner, 3D printable modelModelFork

    Community

    Three arm fidget spinner

    Three-arm fidget spinner, 7 mm thick, 75 mm tip to tip, shown assembled: two 22 mm finger caps sit on either face of the centre bearing seat and screw into e…

  • Laser cut toy roadster, laser-cut designLaserFork

    Laser cut

    Laser cut toy roadster

    Thirteen parts cut from 3 mm birch plywood: a chassis, axle bars, four wheels, body sides, a seat back, a windshield, and grille and tail plates.

  • Lego minifig head, 3D printable modelModelFork

    Community

    Lego minifig head

    Minifigure-style head: a cylinder with a hollow underside for the neck, eye and smile recesses on the front, and a hollow stud on top.

Browse creations