name sign
Laser cut name sign
Laser cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
Prompt that made this
Name sign for a laser cutter, 3 mm plywood. The name "Olivia" in a bold connected script font, about 400 mm wide, cut out as one piece with every letter touching the next so nothing falls out. A separate 420 × 150 mm backing board with rounded corners and an engraved 5 mm border, and two 4 mm hanging holes. The name is a text parameter.
Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Name, wedding and memorial signs are remade for every order, and a bought file is one name at one size. Here the text is a parameter: type the next customer's name, set the size, and download a new cut file. Works with xTool, Glowforge and LightBurn.
The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.
How to cut
3 mm plywood, MDF or acrylic. Set the stock to your sheet before you download. Engrave first, then cut inner shapes, then the outline. Glue layers with wood glue or acrylic cement.
Questions
- Can I change the size or text of this laser cut name sign?
- Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
- What file do I get?
- SVG cut files, one per sheet, with parts nested and kerf offset, plus DXF with one layer per operation. The SVG opens in LightBurn, xTool Creative Space and Glowforge.
More to make
ModelOpenCommunity
Treasure chest
Treasure chest with a hollow base, a barrel-vault hollow lid, metal straps, and a lock plate with a hasp.
LaserOpenLaser cut
Laser cut toy roadster
Thirteen parts cut from 3 mm birch plywood: a chassis, axle bars, four wheels, body sides, a seat back, a windshield, and grille and tail plates.
ModelOpenCommunity
Three arm fidget spinner
Three-arm fidget spinner, 7 mm thick, 75 mm tip to tip, shown assembled: two 22 mm finger caps sit on either face of the centre bearing seat and screw into e…
LaserOpenLaser cut
Duomo di Milano
Flat-pack model of Milan Cathedral: a finger-jointed nave with a portalled facade, a stepped gable, two rows of pinnacles and a tall crossed central spire.
ModelOpenCommunity
Rover chassis
3D-printable four-motor rover chassis: a 180x120x4 plate with four half-saddles at the corners, BTS7960 and ESP32 standoff pads, a 150x60 battery tray with s…
LaserOpenLaser cut
Model windmill
Cylindrical-style tower of tabbed wall strips with a small windowed cupola on the lid and a spinning four-paddle sail on a dowel axle through the front and b…