Laser cut
Duomo di Milano
By Byteworks
Flat-pack model of Milan Cathedral: a finger-jointed nave with a portalled facade, a stepped gable, two rows of pinnacles and a tall crossed central spire.
Prompt that made this
The duomo of milan
Made in Voloom from the prompt under the model. Download the cut sheets as they are, or fork a copy to change the material thickness and every size on the right — the joints re-cut to fit, without spending credits.
Make it fit your stock
Measure your sheet first. In the editor, set the thickness to match and every slot and tab re-cuts to fit. Change the sheet size and the parts nest again. Neither spends credits.
Download an SVG per sheet and send it to your laser cutter.
More to make
LaserForkLaser cut
Laser cut toy roadster
Thirteen parts cut from 3 mm birch plywood: a chassis, axle bars, four wheels, body sides, a seat back, a windshield, and grille and tail plates.
ModelForkCommunity
Rover chassis
3D-printable four-motor rover chassis: a 180x120x4 plate with four half-saddles at the corners, BTS7960 and ESP32 standoff pads, a 150x60 battery tray with s…
ModelForkCommunity
Castle dice tower
Castle-style dice tower: four round corner turrets, battlements (merlons) around the open top and arrow-slit windows, with the same internal baffles, front e…
LaserForkLaser cut
Eiffel tower
Eiffel tower with real proportions: platforms at 17% and 35% of the height, a slender concave profile, an arched first section, a top deck at 84% and a taper…
ModelForkCommunity
Treasure chest
Treasure chest with a hollow base, a barrel-vault hollow lid, metal straps, and a lock plate with a hasp.
LaserForkLaser cut
T rex skeleton puzzle
A slot-together T-rex skeleton about 300 mm long, with a larger toothed open-jawed skull, a long tapering tail, bent-knee legs and three-toed feet that stand…