3D print
Prompt that made this
Pixel 7 cover
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Protective case for a Google Pixel 7 (about 155.6 x 73.2 x 8.7 mm)
The phone drops into the cavity from the front and is held by a thin lip around the screen. The back floor protects the phone, a shallow recess framed by a raised rim breaks up the back face, and the cutouts expose the camera bar, buttons, USB-C port, speaker and microphone.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
LaserForkLaser cut
Phone stand 60°
Two profiled side plates with a front lip and a 60° back slope, tied together by three tabbed cross bars, one of which has a cable window.
ModelForkCommunity
Samsung Galaxy A07 phone case
One snap-fit part with retaining lips, a camera window, a side button slot and a port slot at the bottom.
ModelForkCommunity
Pixel 11 pro wall mount
Wall-mounted cradle for a Google Pixel 11 Pro with a back plate, side walls, a bottom shelf with a front retaining lip, and a cable slot through the shelf an…
ModelForkCommunity
Iphone 18 pro max case
Snap-on phone case for a large 6.9-inch class phone, with a screen lip, a camera cutout, side button slots, and USB-C and speaker openings.
ModelForkCommunity
Pixel 11 pro bumper
Open-back bumper case for the Google Pixel 11 Pro that wraps the edges, with front and back retaining lips and cutouts for the USB-C port and side buttons.