3D print
Prompt that made this
A wall mount for the Google Pixel 11 Pro with a cable slot for the charger
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Hold a Google Pixel 11 Pro (71.9 x 152.7 x 8.4 mm) on a wall while it charges.
The phone's weight rests on the bottom shelf. The side walls and front lip keep it from tipping or sliding. The back plate screws to the wall. The charging cable plugs into the phone's bottom port and passes down through the slot in the shelf and out through the notch in the lip.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
LaserForkLaser cut
Phone stand 60°
Two profiled side plates with a front lip and a 60° back slope, tied together by three tabbed cross bars, one of which has a cable window.
ModelForkCommunity
Pixel 7 case
Snap-on phone case for a Pixel 7 with a front retaining lip, a shallow back recess framed by a raised perimeter rim, a camera bar window, side button slots a…
ModelForkCommunity
Pixel 11 pro bumper
Open-back bumper case for the Google Pixel 11 Pro that wraps the edges, with front and back retaining lips and cutouts for the USB-C port and side buttons.
ModelForkCommunity
Iphone 18 pro max case
Snap-on phone case for a large 6.9-inch class phone, with a screen lip, a camera cutout, side button slots, and USB-C and speaker openings.
ModelForkCommunity
Samsung Galaxy A07 phone case
One snap-fit part with retaining lips, a camera window, a side button slot and a port slot at the bottom.