3D print
Prompt that made this
A snug bumper case for the Google Pixel 11 Pro
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Edge protection for a Google Pixel 11 Pro (71.9 x 152.7 x 8.4 mm per devicespecifications.com) that leaves the screen and back open.
A rounded wall rim surrounds the phone edges. A thin back lip and a thin front lip trap the phone along Z. The case is meant to be printed in flexible TPU so the phone can be pressed in. The bottom edge is open for USB-C and speaker, and the right edge has a slot for the power and volume buttons. The back is mostly open so the camera bar is clear.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
LaserForkLaser cut
Phone stand 60°
Two profiled side plates with a front lip and a 60° back slope, tied together by three tabbed cross bars, one of which has a cable window.
ModelForkCommunity
Pixel 11 pro wall mount
Wall-mounted cradle for a Google Pixel 11 Pro with a back plate, side walls, a bottom shelf with a front retaining lip, and a cable slot through the shelf an…
ModelForkCommunity
Iphone 18 pro max case
Snap-on phone case for a large 6.9-inch class phone, with a screen lip, a camera cutout, side button slots, and USB-C and speaker openings.
ModelForkCommunity
Pixel 7 case
Snap-on phone case for a Pixel 7 with a front retaining lip, a shallow back recess framed by a raised perimeter rim, a camera bar window, side button slots a…
ModelForkCommunity
Samsung Galaxy A07 phone case
One snap-fit part with retaining lips, a camera window, a side button slot and a port slot at the bottom.