plasma cut sign
Plasma cut name sign
Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
Prompt that made this
Steel name sign for a plasma table, 3 mm steel plate, 600 × 200 mm. The name "Ranch" cut through in a bold stencil-style font with bridges so the letter middles stay in, inside a 15 mm frame with two 8 mm mounting holes. The name is a text parameter. 1.5 mm kerf.
Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Plasma shops redraw the same brackets and signs for every job. This DXF is parametric: set the plate, hole sizes and kerf, then download a file ready for your table's CAM.
The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.
How to cut
Mild steel at the thickness given. Set kerf to your torch and consumables before you download. Pierce away from the part edge and use lead-ins in your CAM.
Questions
- Can I change the size or text of this plasma cut name sign?
- Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
- What file do I get?
- DXF with parts nested and kerf offset, plus SVG. Import it into your plasma table's CAM.
More to make
CNCOpenCNC cut
Slot together side table
A 400 × 400 mm side table, 450 mm tall, cut from 18 mm ply: two splayed A-frame end panels with arched feet, tabbed into the top, and a lower shelf that lock…
ModelOpenCommunity
Locking multi cable clip
Four-cable locking clip: a base with four 7.5 mm channels, a separate snap-on lid with 1.2 mm latch barbs shown lifted above the base, and optional 4 mm end…
LaserOpenlaser cut organizer
Laser cut desk organizer
Laser cut desk organizer as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCOpenCNC cut
Chair - Rounded
A taller, sleeker flat-pack chair with tapered side frames and a backrest reclined at an angle: the front legs splay forward and narrow toward the foot, and…
ModelOpenCommunity
Coffee pod holder
Rectangular coffee-pod tray with a 4 x 3 grid of round 38 mm pockets, 16 mm deep, separated by 1.6 mm walls, on a 1.6 mm floor.
LaserOpenhouse number sign
House number sign
House number sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.