3D print
Prompt that made this
Coffee-pod tray, 4 × 3 grid of 38 mm pockets, 16 mm deep, 160 × 120 mm overall, 1.6 mm walls.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Countertop or drawer storage for 12 coffee pods
Each pod sits upright in its own round pocket. The 1.6 mm walls keep the pods apart and the solid floor supports them.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Door stop wedge
A 130 x 45 mm door stop wedge rising from 3 mm to 28 mm, with triangular grip ridges on the slope, a lanyard hole near the tall end and a slightly dished und…
LaserForklaser cut lamp
Laser cut lamp
Laser cut lamp as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCForkCNC cut
Drawer cabinet
Finger-jointed carcass with a back and two tabbed shelves, holding three sliding finger-jointed drawers with hand slots.
ModelForkCommunity
Shot glass
Tapered shot glass with a thick solid base, a chamfered underside edge, a shallow recess under the base for a flat standing ring, thin walls and an open rim…
LaserForklaser cut organizer
Laser cut desk organizer
Laser cut desk organizer as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCForkCNC cut
Slot together side table
A 400 × 400 mm side table, 450 mm tall, cut from 18 mm ply: two splayed A-frame end panels with arched feet, tabbed into the top, and a lower shelf that lock…