laser cut lamp
Laser cut lamp
Laser cut lamp as a parametric cut file. Set the stock and size, then download the SVG or DXF.
Prompt that made this
Box lamp for a laser cutter, 3 mm plywood, 140 × 140 × 220 mm. Four finger-jointed side panels each cut with a honeycomb pattern of 12 mm hexagons inside a 15 mm solid frame, a top panel with a vent hole, and a base with a 40 mm hole and a cable notch for an E14 bulb holder.
Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Most laser files for sale are one size for one sheet thickness, so the joints fail the moment your plywood is 3.2 mm. This one is parametric: set your stock and size, and every joint follows. Works with xTool, Glowforge and LightBurn.
The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.
How to cut
3 mm plywood or MDF unless noted. Measure the sheet and set the stock to it: joints are cut for the thickness you give. Engrave first, cut inner shapes before outlines.
Questions
- Can I change the size or text of this laser cut lamp?
- Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
- What file do I get?
- SVG cut files, one per sheet, with parts nested and kerf offset, plus DXF with one layer per operation. The SVG opens in LightBurn, xTool Creative Space and Glowforge.
More to make
CNCOpencnc box
CNC box with lid
CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.
LaserOpenLaser cut
Glueless desk organizer
Open-top desk tray with finger-jointed walls and two crossing dividers; every joint is a mechanical finger, tab or cross-slot, so it assembles without glue.
ModelOpenCommunity
Box with a hinged lift lid
Five parts: a bin, a hinged lid that follows its curved front, and a foot pedal that lifts the lid through a link bar and push rod.
CNCOpenCNC cut
Slot together side table
A 400 × 400 mm side table, 450 mm tall, cut from 18 mm ply: two splayed A-frame end panels with arched feet, tabbed into the top, and a lower shelf that lock…
LaserOpenLaser cut
Round lantern
A two-storey round lantern with a double candle door (two leaves, each hinged on top and bottom pins at its outer side), a diamond cross-hatch lattice with s…
ModelOpenCommunity
Under desk cable tray
Under-desk U-channel cable tray with open ends and outward top lips, two separate slotted L-bracket clips that hook under the lips, and optional friction-fit…