CNC box with lid

CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.

CNC
svg
Customize for free

Prompt that made this

Box with a lid for a CNC router, 12 mm plywood, 300 × 200 × 150 mm outside. Box-jointed corners with dogbones, a base let into a 6 mm deep rebate, and a lift-off lid with a 6 mm deep locating pocket on its underside. 6 mm bit.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.

Why this one

CNC plans usually come as a fixed DXF for one sheet and one bit. This design is parametric: set your stock, bit size and dimensions, and the pockets, slots and dogbones are redrawn to match.

The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.

How to cut

Plywood or hardwood at the thickness given. Pockets and profiles are separate DXF layers; set depths in your CAM. Dogbones are already in the joint corners. Use tabs on small parts.

Questions

Can I change the size or text of this CNC box with lid?
Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
What file do I get?
DXF with one layer per depth (pockets, grooves, profile), plus SVG. Import it into VCarve, Fusion or Easel and set the depths there.

More to make

  • Round lantern, laser-cut designLaserOpen

    Laser cut

    Round lantern

    A two-storey round lantern with a double candle door (two leaves, each hinged on top and bottom pins at its outer side), a diamond cross-hatch lattice with s…

  • Shot glass, 3D printable modelModelOpen

    Community

    Shot glass

    Tapered shot glass with a thick solid base, a chamfered underside edge, a shallow recess under the base for a flat standing ring, thin walls and an open rim…

  • Plasma name sign, laser-cut designLaserOpen

    plasma cut sign

    Plasma cut name sign

    Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • Drawer cabinet, CNC designCNCOpen

    CNC cut

    Drawer cabinet

    Finger-jointed carcass with a back and two tabbed shelves, holding three sliding finger-jointed drawers with hand slots.

  • Toothbrush holder, 3D printable modelModelOpen

    Community

    Toothbrush holder

    Hollow toothbrush cup with an 8 mm floor drain and a separate drop-in insert with four 12 mm brush holes.

  • Honeycomb box lamp, laser-cut designLaserOpen

    laser cut lamp

    Laser cut lamp

    Laser cut lamp as a parametric cut file. Set the stock and size, then download the SVG or DXF.

Browse creations