laser cut organizer
Laser cut desk organizer
Laser cut desk organizer as a parametric cut file. Set the stock and size, then download the SVG or DXF.
Prompt that made this
Desk organizer for a laser cutter, 3 mm plywood, 240 × 120 mm footprint. Finger-jointed throughout: a 100 mm tall pen cup, a phone slot 12 mm wide at a 70° lean, and a 30 mm deep tray for clips and keys, sharing one base.
Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Most laser files for sale are one size for one sheet thickness, so the joints fail the moment your plywood is 3.2 mm. This one is parametric: set your stock and size, and every joint follows. Works with xTool, Glowforge and LightBurn.
The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.
How to cut
3 mm plywood or MDF unless noted. Measure the sheet and set the stock to it: joints are cut for the thickness you give. Engrave first, cut inner shapes before outlines.
Questions
- Can I change the size or text of this laser cut desk organizer?
- Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
- What file do I get?
- SVG cut files, one per sheet, with parts nested and kerf offset, plus DXF with one layer per operation. The SVG opens in LightBurn, xTool Creative Space and Glowforge.
More to make
CNCOpenCNC cut
Workstation desk
A wide flat-pack desk on two tapered, splayed inverted-U leg frames with the desk top resting between them, an upper bracket pressed against the underside of…
ModelOpenCommunity
Spice drawer insert
Two separate 200x50 mm wedge-shaped spice rack rows, each with four 45 mm jar pockets 12 mm deep, tilted 15 degrees back so labels face up and out.
CNCOpencnc box
CNC box with lid
CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenCommunity
Coffee pod holder
Rectangular coffee-pod tray with a 4 x 3 grid of round 38 mm pockets, 16 mm deep, separated by 1.6 mm walls, on a 1.6 mm floor.
LaserOpenlaser cut lamp
Laser cut lamp
Laser cut lamp as a parametric cut file. Set the stock and size, then download the SVG or DXF.
