Chair rounded

By Byteworks

A taller, sleeker flat-pack chair with tapered side frames and a backrest reclined at an angle: the front legs splay forward and narrow toward the foot, and the rear legs narrow toward the foot. A seat and a tall slotted, tilted backrest are tabbed in, all from one 18 mm board.

CNC
svg
Customize for free
Chair rounded, CNC design

Cut settings: 18 mm birch plywood · 4 × 8 ft landscape · 1 sheet · 7.8 m of cut

Prompt that made this

Smooth chair

Open the model

Made in Voloom from the prompt under the model. Download the cut sheets as they are, or fork a copy to change the material thickness and every size on the right — the joints re-cut to fit, without spending credits.

Make it fit your stock

Measure your sheet first. In the editor, set the thickness to match and every slot and tab re-cuts to fit. Change the sheet size and the parts nest again. Neither spends credits.

Download an SVG per sheet and send it to your CNC router.

More to make

  • A stool, CNC designCNCFork

    CNC cut

    A stool

    Round plywood stool: a disc seat held by two interlocking leg frames whose legs splay outward, tabbed up through the seat.

  • Bike wall hook, 3D printable modelModelFork

    Community

    Bike wall hook

    Wall-mounted bike hook: a vertical 40x90x8 back plate with two countersunk 5 mm screw holes 60 mm apart, a rounded J-shaped arm 30 wide that projects 110 mm…

  • Desk organizer, laser-cut designLaserFork

    laser cut organizer

    Laser cut desk organizer

    Laser cut desk organizer as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • Slot together side table, CNC designCNCFork

    CNC cut

    Slot together side table

    A 400 × 400 mm side table, 450 mm tall, cut from 18 mm ply: two splayed A-frame end panels with arched feet, tabbed into the top, and a lower shelf that lock…

  • Wall key hook, 3D printable modelModelFork

    Community

    Wall key hook

    180x20x10 wall key rail with a 4 mm dovetail, two 4 mm screw slots and four separate 12 mm wide J-hooks that slide on the dovetail.

  • Pitched roof birdhouse, laser-cut designLaserFork

    Laser cut

    Pitched roof birdhouse

    Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…

Browse creations