Bike wall hook

By Byteworks

Wall-mounted bike hook: a vertical 40x90x8 back plate with two countersunk 5 mm screw holes 60 mm apart, a rounded J-shaped arm 30 wide that projects 110 mm from the wall and turns up at the end with a 45 mm lip, and a rib under the arm.

Model
stl3mfstepobjglbbrep
Customize for free
Bike wall hook, 3D printable model

Prompt that made this

Wall-mounted bike hook. A 90 × 40 mm back plate, 8 mm thick, with two countersunk screw holes for 5 mm screws, 60 mm apart. A curved hook arm comes out 110 mm and turns up at the end, 30 mm wide, with a 45 mm inner gap sized for a road or MTB tyre. Rounded edges, a rib under the arm for strength.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Hanging a road or MTB bicycle by its tyre on a wall

The vertical back plate is screwed to the wall through two countersunk holes. The arm projects 110 mm out and its upturned end forms a 45 mm deep cradle that holds the tyre. A triangular rib under the arm carries the bending load into the plate.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • A stool, CNC designCNCFork

    CNC cut

    A stool

    Round plywood stool: a disc seat held by two interlocking leg frames whose legs splay outward, tabbed up through the seat.

  • House number sign, laser-cut designLaserFork

    house number sign

    House number sign

    House number sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • Plastic wine glass, 3D printable modelModelFork

    Community

    Plastic wine glass

    Clear stemmed wine goblet: a solid of revolution with a thin flat foot, slender stem with a small bead, a softly filleted stem-to-bowl junction, and an open…

  • Chair - Rounded, CNC designCNCFork

    CNC cut

    Chair - Rounded

    A taller, sleeker flat-pack chair with tapered side frames and a backrest reclined at an angle: the front legs splay forward and narrow toward the foot, and…

  • Plasma name sign, laser-cut designLaserFork

    plasma cut sign

    Plasma cut name sign

    Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • Self draining soap dish, 3D printable modelModelFork

    Community

    Self draining soap dish

    A 120x80x18 mm soap dish with a 4° floor sloping to an open front, six ribs, 3 mm side and back walls, four 3 mm feet at the corners, and a separate drip tra…

Browse creations