3D print
Prompt that made this
Self-draining soap dish, 120 × 80 × 18 mm. Sloped floor 4°, six 4 × 70 mm ribs 4 mm tall, 3 mm side walls. A separate drip tray that slides under the open front. Four 3 mm feet. Prints without supports.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Soap dish for a sink or shower shelf that keeps the soap off standing water.
Water runs along the 4° sloped floor between the ribs, out of the open front and into the drip tray. The tray slides in under the front between the feet, which lift the dish 3 mm above it.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
CNCForkcnc box
CNC box with lid
CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.
LaserForkLaser cut
Pitched roof birdhouse
Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…
ModelForkCommunity
Door stop wedge
A 130 x 45 mm door stop wedge rising from 3 mm to 28 mm, with triangular grip ridges on the slope, a lanyard hole near the tall end and a slightly dished und…
CNCForkCNC cut
Drawer cabinet
Finger-jointed carcass with a back and two tabbed shelves, holding three sliding finger-jointed drawers with hand slots.
LaserForklaser cut lamp
Laser cut lamp
Laser cut lamp as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Furniture leg riser
Tapered square furniture leg riser, hollow underneath with crossing ribs, a top pocket for the leg and a chamfered bottom edge.