house number sign
House number sign
House number sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
Prompt that made this
House number sign for a laser cutter, two layers of 6 mm plywood or acrylic. A 300 × 150 mm backing plate with rounded corners and four 5 mm screw holes, one in each corner, inset 15 mm. The number "42" cut as a separate raised layer in a bold sans font, about 110 mm tall, and the street name "Oak Lane" engraved below it. Number and street are text parameters.
Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Name, wedding and memorial signs are remade for every order, and a bought file is one name at one size. Here the text is a parameter: type the next customer's name, set the size, and download a new cut file. Works with xTool, Glowforge and LightBurn.
The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.
How to cut
3 mm plywood, MDF or acrylic. Set the stock to your sheet before you download. Engrave first, then cut inner shapes, then the outline. Glue layers with wood glue or acrylic cement.
Questions
- Can I change the size or text of this house number sign?
- Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
- What file do I get?
- SVG cut files, one per sheet, with parts nested and kerf offset, plus DXF with one layer per operation. The SVG opens in LightBurn, xTool Creative Space and Glowforge.
More to make
CNCOpenCNC cut
Chair - Pointy
Flat-pack side chair with two angular side frames (forward-splayed tapered front legs, a gabled apron and a single raked back post), a seat panel and two che…
LaserOpenplasma cut sign
Plasma cut name sign
Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenCommunity
Toilet paper holder
Wall-mounted toilet paper holder: 90x60x6 plate with two countersunk screw holes, a 150 mm long 25 mm diameter arm, and a raised lip at the free tip.
CNCOpencnc box
CNC box with lid
CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.
LaserOpentea light holder
Laser cut tea light holder
Laser cut tea light holder as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenCommunity
Shot glass
Tapered shot glass with a thick solid base, a chamfered underside edge, a shallow recess under the base for a flat standing ring, thin walls and an open rim…