Chair pointy

By Byteworks

Flat-pack side chair with two angular side frames (forward-splayed front legs that widen toward the seat, a gabled apron and a single raked back post), a seat panel and two chevron backrest rails, all tab-jointed.

CNC
svg
Customize for free
Chair pointy, CNC design

Cut settings: 18 mm birch plywood · 4 × 8 ft · 1 sheet · 11.0 m of cut

Prompt that made this

A smooth design chair with neat angles

Open the model

Made in Voloom from the prompt under the model. Download the cut sheets as they are, or fork a copy to change the material thickness and every size on the right — the joints re-cut to fit, without spending credits.

Make it fit your stock

Measure your sheet first. In the editor, set the thickness to match and every slot and tab re-cuts to fit. Change the sheet size and the parts nest again. Neither spends credits.

Download an SVG per sheet and send it to your CNC router.

More to make

  • Furniture leg riser, 3D printable modelModelFork

    Community

    Furniture leg riser

    Tapered square furniture leg riser, hollow underneath with crossing ribs, a top pocket for the leg and a chamfered bottom edge.

  • Drawer cabinet, CNC designCNCFork

    CNC cut

    Drawer cabinet

    Finger-jointed carcass with a back and two tabbed shelves, holding three sliding finger-jointed drawers with hand slots.

  • Two drawer cabinet, laser-cut designLaserFork

    Laser cut

    Two drawer cabinet

    Small carcass with a middle shelf and two finger-jointed open-top box drawers stacked in two bays.

  • Broom mop holder, 3D printable modelModelFork

    Community

    Broom mop holder

    Wall-mounted broom and mop holder: a 70x50x6 back plate with two 4 mm screw holes and a 30 mm tall C-clip with a front opening and flexible arms that grips h…

  • A stool, CNC designCNCFork

    CNC cut

    A stool

    Round plywood stool: a disc seat held by two interlocking leg frames whose legs splay outward, tabbed up through the seat.

  • Honeycomb box lamp, laser-cut designLaserFork

    laser cut lamp

    Laser cut lamp

    Laser cut lamp as a parametric cut file. Set the stock and size, then download the SVG or DXF.

Browse creations