tea light holder
Laser cut tea light holder
Laser cut tea light holder as a parametric cut file. Set the stock and size, then download the SVG or DXF.
Prompt that made this
Hexagonal tea light lantern for a laser cutter, 3 mm plywood, 90 mm across and 110 mm tall. Six panels joined with tabs into a top and bottom ring, each panel with a geometric star cutout so the light throws a pattern. The base has a 40 mm recess that holds a standard tea light.
Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Most laser files for sale are one size for one sheet thickness, so the joints fail the moment your plywood is 3.2 mm. This one is parametric: set your stock and size, and every joint follows. Works with xTool, Glowforge and LightBurn.
The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.
How to cut
3 mm plywood or MDF unless noted. Measure the sheet and set the stock to it: joints are cut for the thickness you give. Engrave first, cut inner shapes before outlines.
Questions
- Can I change the size or text of this laser cut tea light holder?
- Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
- What file do I get?
- SVG cut files, one per sheet, with parts nested and kerf offset, plus DXF with one layer per operation. The SVG opens in LightBurn, xTool Creative Space and Glowforge.
More to make
ModelOpenCommunity
Furniture leg riser
Tapered square furniture leg riser, hollow underneath with crossing ribs, a top pocket for the leg and a chamfered bottom edge.
LaserOpenLaser cut
Glueless desk organizer
Open-top desk tray with finger-jointed walls and two crossing dividers; every joint is a mechanical finger, tab or cross-slot, so it assembles without glue.
CNCOpenCNC cut
Drawer cabinet
Finger-jointed carcass with a back and two tabbed shelves, holding three sliding finger-jointed drawers with hand slots.
ModelOpenCommunity
Floating shelf bracket
L-shaped floating shelf bracket with a triangular gusset, two countersunk wall screw holes and two 4 mm holes in the arm.
LaserOpenplasma cut sign
Plasma cut name sign
Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCOpenCNC cut
Workstation desk
A wide flat-pack desk on two tapered, splayed inverted-U leg frames with the desk top resting between them, an upper bracket pressed against the underside of…