3D print
Prompt that made this
Wall key rail, 180 × 20 × 10 mm, two 4 mm screw slots, and four separate 12 mm J-hooks that slide onto a 4 mm dovetail.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Wall-mounted key or tool rail with repositionable hooks
The rail is screwed to a wall through two slots. Each separate J-hook has a female dovetail slot that slides along the rail's male dovetail and is held by the dovetail undercut. Keys hang in the J cradle.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
CNCForkCNC cut
Slot together side table
A 400 × 400 mm side table, 450 mm tall, cut from 18 mm ply: two splayed A-frame end panels with arched feet, tabbed into the top, and a lower shelf that lock…
ModelForkCommunity
Parametric box with lid
Two-part storage box (100x70x50 inside, 1.6 mm walls) with a recessed 4 mm lid, optional snap hook and slot on the front long side, and optional two-knuckle…
LaserForktea light holder
Laser cut tea light holder
Laser cut tea light holder as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCForkcnc box
CNC box with lid
CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Spice drawer insert
Two separate 200x50 mm wedge-shaped spice rack rows, each with four 45 mm jar pockets 12 mm deep, tilted 15 degrees back so labels face up and out.
LaserForkLaser cut
Pitched roof birdhouse
Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…