3D print
Prompt that made this
Parametric storage box, 100 × 70 × 50 mm inside, 1.6 mm walls, 0.8 mm lid recess. Separate lid 4 mm thick. Optional snap latch (hook + slot) on the long side, and optional two-knuckle hinge on the back with a 3 mm pin.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Printable parametric storage box with a separate lid for small parts
The lid plug seats in a 0.8 mm recess in the rim, the lid hook snaps into a wall slot on the front, and the lid pivots on a pin through one box knuckle and one lid knuckle at the back
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Coral ceramic mug
Tapered open-top ceramic mug with a thin wall, a midspan station, and a C-shaped side handle on the +X side.
CNCForkCNC cut
Slot together side table
A 400 × 400 mm side table, 450 mm tall, cut from 18 mm ply: two splayed A-frame end panels with arched feet, tabbed into the top, and a lower shelf that lock…
LaserForktea light holder
Laser cut tea light holder
Laser cut tea light holder as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Filament spool holder
Two open A-frame spool stands with 8.2 mm axle holes at 50 mm height, optional 608 bearing seats on the inner faces, and a separate 8 mm x 100 mm axle.
CNCForkCNC cut
Chair - Rounded
A taller, sleeker flat-pack chair with tapered side frames and a backrest reclined at an angle: the front legs splay forward and narrow toward the foot, and…
LaserForkLaser cut
Pitched roof birdhouse
Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…