Laser cut
Cross leg stool
By Byteworks
Round stool with two cross-slotted X legs, a ring at the feet tying them together, and a round seat tabbed into the leg tops.
Prompt that made this
A small stool: two leg panels that cross-slot into each other in an X, a stretcher ring between them, and a round seat tabbed into the tops of the legs. About 320 mm tall.
Made in Voloom from the prompt under the model. Download the cut sheets as they are, or fork a copy to change the material thickness and every size on the right — the joints re-cut to fit, without spending credits.
Make it fit your stock
Measure your sheet first. In the editor, set the thickness to match and every slot and tab re-cuts to fit. Change the sheet size and the parts nest again. Neither spends credits.
Download an SVG per sheet and send it to your laser cutter.
More to make
LaserForkplasma cut sign
Plasma cut name sign
Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCForkcnc box
CNC box with lid
CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Steam Deck stand
Steam Deck stand: 110x80 base with a dovetail groove and a separate 128 mm wide yoke with an 18 mm slot leaning at 65 degrees and a 12 mm cable notch.
LaserForklaser cut organizer
Laser cut desk organizer
Laser cut desk organizer as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCForkCNC cut
Chair - Rounded
A taller, sleeker flat-pack chair with tapered side frames and a backrest reclined at an angle: the front legs splay forward and narrow toward the foot, and…
ModelForkCommunity
Wall key hook
180x20x10 wall key rail with a 4 mm dovetail, two 4 mm screw slots and four separate 12 mm wide J-hooks that slide on the dovetail.