3D print
Prompt that made this
Gridfinity 2×1 phone stand, 84 × 42 mm base, 65° backrest 80 mm tall, 8 mm front lip, 10 mm cable slot. Magnet pockets in the Gridfinity base.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Desk phone stand that drops into a Gridfinity baseplate and holds a phone leaning back at 65 degrees.
The Gridfinity feet seat in the baseplate and the magnets hold it down. The phone's bottom edge sits on the ledge behind the front lip, its back leans on the 65 degree backrest, and the charging cable passes through the slot under the phone.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity rugged case
Rugged Gridfinity case: 180x140x90 overall, with a 180x132x90 shell (the 8 mm pivot pins bring the front to 140), a 4x3 baseplate inside, a lid with a gasket…
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity cable bin
A 2x2 Gridfinity bin, 6 units tall, plus a separate 8-slot cable comb (7 mm slots) that snaps onto the front lip.
ModelForkCommunity
Gridfinity SD card holder
1×1 Gridfinity solid bin, 6 units tall, with eight 2.4×24 mm SD slots and twelve 1.2×11 mm microSD slots 8 mm deep, labelled by two raised bars.
ModelForkCommunity
Gridfinity socket organizer
4x2 Gridfinity tray with two rows of five 3/8 in drive posts, 12 mm tall, engraved with the socket sizes 10 to 19 mm, and magnet pockets.