Gridfinity rugged case

By Byteworks

Rugged Gridfinity case: 180x140x90 overall, with a 180x132x90 shell (the 8 mm pivot pins bring the front to 140), a 4x3 baseplate inside, a lid with a gasket groove, two separate pin-pivot hook latches and an optional bow handle on the lid.

Model
stl3mfstepobjglbbrep
Customize for free
Gridfinity rugged case, 3D printable model

Prompt that made this

Gridfinity rugged case for a 4 × 3 baseplate. Shell 180 × 140 × 90 mm outside, 2.4 mm walls, lid with a 2 mm gasket groove, two separate snap latches, and an optional bow handle on the lid. Inside floor is a Gridfinity 4 × 3 pocket grid.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Portable carrying case for a Gridfinity 4x3 layout

The shell holds the 4x3 Gridfinity baseplate on its floor. The lid closes onto the wall rim with a 2 mm gasket groove aligned over the wall. Two strap latches pivot on pins on the shell front and their hook tabs clamp over the lid top. A bow handle on the lid is optional.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Gridfinity multiboard shelf, 3D printable modelModelFork

    multiboard gridfinity

    Multiboard Gridfinity shelf

    Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.

  • Gridfinity 2×2 bin, 3D printable modelModelFork

    Community

    Gridfinity 2×2 bin

    2x2 Gridfinity bin, 6 units tall, with 1.2 mm walls, stacking lip, engraved front label and four midline grooves. A separate plus-shaped cross divider drops…

  • Gridfinity wall shelf, 3D printable modelModelFork

    opengrid gridfinity

    openGrid Gridfinity shelf

    openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.

  • Gridfinity 3×2 bin, 3D printable modelModelFork

    Community

    Gridfinity 3×2 bin

    3x2 Gridfinity bin, 6 units tall, 1.2 mm walls, stacking lip, magnet holes and a sloped label tab on the inside of the front wall.

  • Gridfinity 1×1 bin, 3D printable modelModelFork

    Community

    Gridfinity 1×1 bin

    1x1 Gridfinity bin, 6 units tall, with four 6.1 mm magnet pockets, an optional front label tab and an optional separate press-fit lid.

  • Gridfinity baseplate for IKEA Alex, 3D printable modelModelFork

    Community

    Gridfinity baseplate for IKEA Alex

    Two separate 3x6-cell Gridfinity baseplate tiles, side by side, that together fill a 252x252 mm Alex drawer, with optional magnet pockets.

Browse creations