opengrid gridfinity
Prompt that made this
Gridfinity shelf for openGrid: a 4 × 1 cell openConnect back with a 2 × 1 Gridfinity baseplate in front of it, fused, with a 2 mm floor and a border to the back's width.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
openGrid is a 28 mm wall and desk grid with its own connector, openConnect: one slot per cell that slides down over a head in the board. These parts have the openConnect slots cut to spec in the back, with Multiconnect on 28 mm centres one switch away, and the slots follow when you resize.
The prompt under the model is the starting size. Fork it to move a wall, a hole, or a flag without spending a prompt.
How to print
PLA or PETG, 0.2 mm, 3 walls on anything that holds tools. Print it standing up, as it hangs: the openConnect slots have chamfered tops, so they need no supports.
Free tools for this STL
- STL volume and weight calculatorUpload an STL, 3MF, or OBJ and get its volume, surface area, size, and the filament weight and cost for PLA, PETG, ABS, and more.
- STL viewer onlineOpen STL files in your browser. Measure distances and holes, cut a section, check it is watertight, and see the print weight. No install, nothing uploaded.
- Convert STL to GLBFree STL to GLB converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the GLB.
- Convert STL to OBJFree STL to OBJ converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the OBJ.
Questions
- Can I change the size of this opengrid gridfinity?
- Yes. Sign up free, fork the part, and scrub any size. Parameter edits do not spend a prompt.
- What file do I get?
- STL for the slicer and GLB in the browser. STEP is on Maker and Pro.
More to make
ModelOpenopengrid bit holder
openGrid bit holder
openGrid bit holder as a parametric solid. Change a size, then download the STL.
ModelOpenCommunity
Gridfinity pen cup
2x2 Gridfinity pen cup, 12 units tall, 1.2 mm walls, open top, no stacking lip, magnet pockets in the feet.
ModelOpenCommunity
Gridfinity phone stand
Gridfinity 2x1 phone stand with a 65 degree backrest, an 8 mm front lip split by a 10 mm cable slot, and magnet pockets in the base.
ModelOpenopengrid pliers holder
openGrid pliers holder
openGrid pliers holder as a parametric solid. Change a size, then download the STL.
ModelOpenCommunity
Gridfinity 1×1 bin
1x1 Gridfinity bin, 6 units tall, with four 6.1 mm magnet pockets, an optional front label tab and an optional separate press-fit lid.
