3D print
Prompt that made this
Gridfinity 1×1 storage bin, 42 × 42 mm footprint, 6 units tall (42 mm inside). 1.2 mm walls, 0.8 mm floor, 2.5 mm stacking lip. Optional 12 × 6 mm label tab on the front. Four 6.1 mm magnet pockets on the underside, 2.2 mm deep, on the standard Gridfinity 31.5 mm centres. Separate optional lid that press-fits the lip.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Small-parts storage on a Gridfinity baseplate, with an optional dust lid.
The bin seats in a baseplate on its spec feet. Magnets press into the underside pockets. The lid's plug drops into the stacking lip opening and holds by friction.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity drawer
Gridfinity drawer built as a 3 x 4 gridfinity_bin, 6 units (42 mm) tall, with top flanges that ride on two separate 180 mm desk-mount rails and an optional 4…
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity socket organizer
4x2 Gridfinity tray with two rows of five 3/8 in drive posts, 12 mm tall, engraved with the socket sizes 10 to 19 mm, and magnet pockets.
ModelForkCommunity
Gridfinity screw organizer
Gridfinity screw organizer bin with divider grooves in the long walls, magnet and screw holes under the feet, and three separate removable divider plates tha…
ModelForkCommunity
Gridfinity 3×2 bin
3x2 Gridfinity bin, 6 units tall, 1.2 mm walls, stacking lip, magnet holes and a sloped label tab on the inside of the front wall.