Gridfinity screw organizer

By Byteworks

Gridfinity screw organizer bin with divider grooves in the long walls, magnet and screw holes under the feet, and three separate removable divider plates that can be moved between grooves.

Model
stl3mfstepobjglbbrep
Customize for free
Gridfinity screw organizer, 3D printable model

Prompt that made this

Gridfinity screws organizer with movable dividers

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Sorting screws, nuts and small hardware on a Gridfinity baseplate, with compartment sizes the user can change

Grooves cut into the two long inside walls hold thin divider plates. Lifting a divider and dropping it into another groove changes the compartment layout. The bin keeps the standard Gridfinity feet, lip, and magnet/screw holes for fixing it to a baseplate.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Gridfinity multiboard shelf, 3D printable modelModelFork

    multiboard gridfinity

    Multiboard Gridfinity shelf

    Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.

  • Gridfinity hex key holder, 3D printable modelModelFork

    Community

    Gridfinity hex key holder

    2x1 Gridfinity bin with seven hex sockets for 1.5 to 6 mm keys (0.3 mm oversize, 18 mm deep), raised size labels and a magnet base.

  • Gridfinity wall shelf, 3D printable modelModelFork

    opengrid gridfinity

    openGrid Gridfinity shelf

    openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.

  • Gridfinity drawer, 3D printable modelModelFork

    Community

    Gridfinity drawer

    Gridfinity drawer built as a 3 x 4 gridfinity_bin, 6 units (42 mm) tall, with top flanges that ride on two separate 180 mm desk-mount rails and an optional 4…

  • Gridfinity 1×1 bin, 3D printable modelModelFork

    Community

    Gridfinity 1×1 bin

    1x1 Gridfinity bin, 6 units tall, with four 6.1 mm magnet pockets, an optional front label tab and an optional separate press-fit lid.

  • Gridfinity baseplate, 3D printable modelModelFork

    Community

    Gridfinity baseplate

    5×4 Gridfinity baseplate, 4.4 mm thick, with optional 6.1 mm magnet pockets and optional 24 mm steel-weight pockets under every cell.

Browse creations