3D print
Prompt that made this
Gridfinity baseplate, 5 × 4 cells (210 × 168 mm), 4.4 mm thick. Standard 42 mm pockets with chamfered rims. Optional 6.1 mm magnet pockets and 24 mm steel-weight pockets under each cell.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Drawer or bench baseplate that holds Gridfinity bins on the standard 42 mm grid
Spec sockets with chamfered rims seat the bin feet. Optional magnet pockets hold bins in place, and optional weight pockets under each cell take steel plates to add mass.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity headphone stand
Gridfinity 2x2 base bin, 10 units tall, with magnet pockets and a through dovetail slot, plus a separate 160 mm tower with a 70 mm U-yoke and a dovetail teno…
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity nozzle holder
1x2 Gridfinity block with two rows of six M6 nozzle pockets, a central 10 mm wrench trough and base magnet pockets.
ModelForkCommunity
Gridfinity hex key holder
2x1 Gridfinity bin with seven hex sockets for 1.5 to 6 mm keys (0.3 mm oversize, 18 mm deep), raised size labels and a magnet base.
ModelForkCommunity
Gridfinity 3×2 bin
3x2 Gridfinity bin, 6 units tall, 1.2 mm walls, stacking lip, magnet holes and a sloped label tab on the inside of the front wall.