3D print
Prompt that made this
Gridfinity 2×2 headphone stand. A 10-unit bin as the base and a separate 160 mm tower with a 70 mm U-yoke that dovetails into the bin. Magnet pockets in the base.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Desk headphone stand that locks onto a Gridfinity grid
The weighted bin sits in a baseplate or is held by magnets. The tower's trapezoidal tenon slides front to back into the bin's dovetail slot and cannot lift out. The headband rests in the U-yoke.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Gridfinity nozzle holder
1x2 Gridfinity block with two rows of six M6 nozzle pockets, a central 10 mm wrench trough and base magnet pockets.
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity pen cup
2x2 Gridfinity pen cup, 12 units tall, 1.2 mm walls, open top, no stacking lip, magnet pockets in the feet.
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity bin lid
Gridfinity 2x1 lid with a stacking-lip seat on the underside, a half-round finger notch on one long edge, and an optional label recess.
ModelForkCommunity
Gridfinity 2×1 bin
2x1 Gridfinity bin, 3 units tall, with a stacking lip, magnet pockets, a front label tab and a separate flat lid that seats in the lip.