3D print
Prompt that made this
Gridfinity 1×2 nozzle block, 42 × 84 mm, 3 units tall. Two rows of six M6 threaded pockets, 6 mm deep, and a 10 mm trough for the wrench. Magnet pockets in the base.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Storing 3D-printer nozzles with M6 threads in a Gridfinity drawer
Solid 3-unit Gridfinity bin; nozzles screw into tapped pockets in two rows and a central trough gives a wrench access to the hex of each nozzle; magnets hold it to a baseplate.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity hex key holder
2x1 Gridfinity bin with seven hex sockets for 1.5 to 6 mm keys (0.3 mm oversize, 18 mm deep), raised size labels and a magnet base.
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity phone stand
Gridfinity 2x1 phone stand with a 65 degree backrest, an 8 mm front lip split by a 10 mm cable slot, and magnet pockets in the base.
ModelForkCommunity
Gridfinity baseplate
5×4 Gridfinity baseplate, 4.4 mm thick, with optional 6.1 mm magnet pockets and optional 24 mm steel-weight pockets under every cell.
ModelForkCommunity
Gridfinity cable bin
A 2x2 Gridfinity bin, 6 units tall, plus a separate 8-slot cable comb (7 mm slots) that snaps onto the front lip.