3D print
Prompt that made this
Gridfinity 2×2 cable bin, 6 units tall, with a separate 8-slot comb (7 mm slots) that snaps onto the front lip.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Cable and cord organiser in a Gridfinity drawer: cables lie in the bin and exit through the comb slots over the front wall.
The comb's two legs straddle the front stacking lip; small snap ridges on the legs' inner faces grip the lip for a push-on fit. Cables drop into the open-top slots, and the teeth keep them separated.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Gridfinity 1×1 bin
1x1 Gridfinity bin, 6 units tall, with four 6.1 mm magnet pockets, an optional front label tab and an optional separate press-fit lid.
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity hex key holder
2x1 Gridfinity bin with seven hex sockets for 1.5 to 6 mm keys (0.3 mm oversize, 18 mm deep), raised size labels and a magnet base.
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity rugged case
Rugged Gridfinity case: 180x140x90 overall, with a 180x132x90 shell (the 8 mm pivot pins bring the front to 140), a 4x3 baseplate inside, a lid with a gasket…
ModelForkCommunity
Gridfinity 2×1 bin
2x1 Gridfinity bin, 3 units tall, with a stacking lip, magnet pockets, a front label tab and a separate flat lid that seats in the lip.