3D print
Prompt that made this
Gridfinity 2×1 bin, 84 × 42 mm footprint, 3 units tall (21 mm inside). 1.2 mm walls, stacking lip, front label tab. Four magnet pockets on the 42 mm centres. A separate flat lid that seats in the lip.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Small-parts storage bin on a standard 42 mm Gridfinity baseplate, with an optional lid.
Chamfered feet seat in the baseplate sockets and magnets hold the bin down. Walls and floor contain the parts, the front label tab gives a place for a label, and the lid sits inside the stacking lip to close the bin.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity scissors holder
2x1 Gridfinity holder with magnet holes: a 50 mm block with two angled 4x70 mm scissor-blade slots and a round craft-knife cup.
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity 2×2 bin
2x2 Gridfinity bin, 6 units tall, with 1.2 mm walls, stacking lip, engraved front label and four midline grooves. A separate plus-shaped cross divider drops…
ModelForkCommunity
Gridfinity cable bin
A 2x2 Gridfinity bin, 6 units tall, plus a separate 8-slot cable comb (7 mm slots) that snaps onto the front lip.
ModelForkCommunity
Gridfinity baseplate
5×4 Gridfinity baseplate, 4.4 mm thick, with optional 6.1 mm magnet pockets and optional 24 mm steel-weight pockets under every cell.