3D print
Prompt that made this
Gridfinity 2×2 bin, 84 × 84 mm, 6 units tall. 1.2 mm walls, stacking lip, front label. A separate cross divider that slots into 1.2 mm grooves at the midlines.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Drawer organiser on a Gridfinity baseplate that can be split into four compartments with a removable divider.
The bin seats on the 42 mm grid with its spec feet and lip. Four groove pads on the inner walls guide a printed cross divider that drops in from above and rests on the floor.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity pen cup
2x2 Gridfinity pen cup, 12 units tall, 1.2 mm walls, open top, no stacking lip, magnet pockets in the feet.
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity screw organizer
Gridfinity screw organizer bin with divider grooves in the long walls, magnet and screw holes under the feet, and three separate removable divider plates tha…
ModelForkCommunity
Gridfinity drawer
Gridfinity drawer built as a 3 x 4 gridfinity_bin, 6 units (42 mm) tall, with top flanges that ride on two separate 180 mm desk-mount rails and an optional 4…
ModelForkCommunity
Gridfinity 3×2 bin
3x2 Gridfinity bin, 6 units tall, 1.2 mm walls, stacking lip, magnet holes and a sloped label tab on the inside of the front wall.