3D print
Prompt that made this
Gridfinity 2×1 hex-key holder. Stepped holes for 1.5, 2, 2.5, 3, 4, 5, 6 mm keys, each hole 0.3 mm over size, 18 mm deep, labelled with raised text. Magnet base.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Storing a set of hex keys in a Gridfinity baseplate
A solid Gridfinity bin carries hex-shaped pockets that grip each key by size, with raised size labels in front of every pocket. Magnet holes in the base hold the bin to the baseplate.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity screw organizer
Gridfinity screw organizer bin with divider grooves in the long walls, magnet and screw holes under the feet, and three separate removable divider plates tha…
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity socket organizer
4x2 Gridfinity tray with two rows of five 3/8 in drive posts, 12 mm tall, engraved with the socket sizes 10 to 19 mm, and magnet pockets.
ModelForkCommunity
Gridfinity scissors holder
2x1 Gridfinity holder with magnet holes: a 50 mm block with two angled 4x70 mm scissor-blade slots and a round craft-knife cup.
ModelForkCommunity
Gridfinity bin lid
Gridfinity 2x1 lid with a stacking-lip seat on the underside, a half-round finger notch on one long edge, and an optional label recess.