3D print
Prompt that made this
Gridfinity 2×1 lid, 84 × 42 mm, 2.4 mm thick, 1.2 mm recess that seats in a stacking lip, 12 mm finger notch on the long edge. Optional label recess 30 × 10 mm.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Closes a 2x1 Gridfinity bin and stacks like a normal bin.
The full-size top flange sits on the bin lip. The smaller underside plug drops inside the lip to locate the lid. The edge notch gives a fingertip hold. The shallow label recess takes a paper or printed label.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity scissors holder
2x1 Gridfinity holder with magnet holes: a 50 mm block with two angled 4x70 mm scissor-blade slots and a round craft-knife cup.
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity pen cup
2x2 Gridfinity pen cup, 12 units tall, 1.2 mm walls, open top, no stacking lip, magnet pockets in the feet.
ModelForkCommunity
Gridfinity hex key holder
2x1 Gridfinity bin with seven hex sockets for 1.5 to 6 mm keys (0.3 mm oversize, 18 mm deep), raised size labels and a magnet base.
ModelForkCommunity
Gridfinity screw organizer
Gridfinity screw organizer bin with divider grooves in the long walls, magnet and screw holes under the feet, and three separate removable divider plates tha…