3D print
Prompt that made this
Two Gridfinity baseplate tiles that tile an IKEA Alex drawer. Each tile is 3 × 6 cells (126 × 252 mm), 4.4 mm thick, with the standard 42 mm Gridfinity pocket grid and 0.5 mm cell chamfers. Optional 6.1 mm magnet pockets at each cell. Separate parts, not fused, so they print on a 256 mm bed.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Lining an IKEA Alex drawer with a Gridfinity grid, printed as two tiles that fit a 256 mm bed.
Each tile is a Gridfinity baseplate with 42 mm sockets that seat standard bins. The tiles sit edge to edge, separated by a small gap, so together they make a continuous 6x6 grid. When magnets are on, each cell gets a pocket and a floor to hold it.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Gridfinity rugged case
Rugged Gridfinity case: 180x140x90 overall, with a 180x132x90 shell (the 8 mm pivot pins bring the front to 140), a 4x3 baseplate inside, a lid with a gasket…
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity nozzle holder
1x2 Gridfinity block with two rows of six M6 nozzle pockets, a central 10 mm wrench trough and base magnet pockets.
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity phone stand
Gridfinity 2x1 phone stand with a 65 degree backrest, an 8 mm front lip split by a 10 mm cable slot, and magnet pockets in the base.
ModelForkCommunity
Gridfinity headphone stand
Gridfinity 2x2 base bin, 10 units tall, with magnet pockets and a through dovetail slot, plus a separate 160 mm tower with a 70 mm U-yoke and a dovetail teno…