3D print
Prompt that made this
Gridfinity 1×1 SD / microSD holder, 42 × 42 mm, 6 units tall. Eight 2.4 × 24 mm SD slots and twelve 1.2 × 11 mm microSD slots, 8 mm deep, labelled by raised bars.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Storing SD and microSD memory cards in a Gridfinity grid
A solid Gridfinity bin with narrow card slots pocketed down from the fill top. The slots keep the cards upright, and raised bars mark the SD and microSD groups.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity rugged case
Rugged Gridfinity case: 180x140x90 overall, with a 180x132x90 shell (the 8 mm pivot pins bring the front to 140), a 4x3 baseplate inside, a lid with a gasket…
ModelForkopengrid gridfinity
openGrid Gridfinity shelf
openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity battery tray
2x3 Gridfinity battery tray with twelve 14.8 mm AA pockets in a 4x3 grid, raised + and - marks, magnet holes under the base, and a separate insert with eight…
ModelForkCommunity
Gridfinity headphone stand
Gridfinity 2x2 base bin, 10 units tall, with magnet pockets and a through dovetail slot, plus a separate 160 mm tower with a 70 mm U-yoke and a dovetail teno…
ModelForkCommunity
Gridfinity phone stand
Gridfinity 2x1 phone stand with a 65 degree backrest, an 8 mm front lip split by a 10 mm cable slot, and magnet pockets in the base.