Gridfinity battery tray

By Byteworks

2x3 Gridfinity battery tray with twelve 14.8 mm AA pockets in a 4x3 grid, raised + and - marks, magnet holes under the base, and a separate insert with eight 10.8 mm AAA pockets. The tray is 8 units tall instead of 3, because a 50 mm AA pocket cannot fit in 21 mm.

Model
stl3mfstepobjglbbrep
Customize for free
Gridfinity battery tray, 3D printable model

Prompt that made this

Gridfinity 2×3 battery tray, 84 × 126 mm, 3 units tall. Twelve AA pockets in a 4 × 3 grid, each 14.8 mm diameter and 50 mm deep, plus a second row layout of eight AAA pockets (10.8 mm) on a removable insert. Raised + / − marks on the floor. Magnet pockets under the Gridfinity base.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Storing AA and AAA batteries in a Gridfinity drawer

A solid Gridfinity bin has vertical cylindrical pockets that hold batteries on end. Magnets under the feet hold it in the baseplate. A separate insert block holds AAA cells in two rows of four.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Gridfinity 1×1 bin, 3D printable modelModelFork

    Community

    Gridfinity 1×1 bin

    1x1 Gridfinity bin, 6 units tall, with four 6.1 mm magnet pockets, an optional front label tab and an optional separate press-fit lid.

  • Gridfinity wall shelf, 3D printable modelModelFork

    opengrid gridfinity

    openGrid Gridfinity shelf

    openGrid Gridfinity shelf as a parametric solid. Change a size, then download the STL.

  • Gridfinity cable bin, 3D printable modelModelFork

    Community

    Gridfinity cable bin

    A 2x2 Gridfinity bin, 6 units tall, plus a separate 8-slot cable comb (7 mm slots) that snaps onto the front lip.

  • Gridfinity multiboard shelf, 3D printable modelModelFork

    multiboard gridfinity

    Multiboard Gridfinity shelf

    Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.

  • Gridfinity 3×2 bin, 3D printable modelModelFork

    Community

    Gridfinity 3×2 bin

    3x2 Gridfinity bin, 6 units tall, 1.2 mm walls, stacking lip, magnet holes and a sloped label tab on the inside of the front wall.

  • Gridfinity headphone stand, 3D printable modelModelFork

    Community

    Gridfinity headphone stand

    Gridfinity 2x2 base bin, 10 units tall, with magnet pockets and a through dovetail slot, plus a separate 160 mm tower with a 70 mm U-yoke and a dovetail teno…

Browse creations