starlink mini roof mount
Prompt that made this
Roof rack mount for a Starlink Mini dish (298.5 × 259 × 38.5 mm) lying flat, face up: a low cradle that holds the dish by its edges with 3 mm lips and 1 mm clearance, a slot at one end for the power cable, and two clamps underneath for 30 × 30 mm square crossbars 200 mm apart, each closed by two M6 bolts. Put the dish width, height and thickness, the crossbar width and the crossbar spacing on parameters.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Starlink Mini mounts are sold for one pole, one rack or one angle. Here the dish size, the pole or crossbar and the tilt are sizes on the model: set them to your setup and download the STL.
The prompt under the model is the starting size. Fork it to move a wall, a hole, or a flag without spending a prompt.
How to print
PETG or ASA outdoors, 0.2 mm, 4 walls, 30% infill: PLA softens in the sun. Print one corner of the cradle first to check the dish fits.
Free tools for this STL
- STL volume and weight calculatorUpload an STL, 3MF, or OBJ and get its volume, surface area, size, and the filament weight and cost for PLA, PETG, ABS, and more.
- STL viewer onlineOpen STL files in your browser. Measure distances and holes, cut a section, check it is watertight, and see the print weight. No install, nothing uploaded.
- Convert STL to GLBFree STL to GLB converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the GLB.
- Convert STL to OBJFree STL to OBJ converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the OBJ.
Questions
- Can I change the size of this starlink mini roof mount?
- Yes. Sign up free, fork the part, and scrub any size. Parameter edits do not spend a prompt.
- What file do I get?
- STL for the slicer and GLB in the browser. STEP is on Maker and Pro.
More to make
ModelOpenCommunity
USB SSD stand
USB-C SSD stand: a 40 x 20 x 50 mm U-cradle tilted at 70° on a base, with a 12 mm slot and a cable notch in the back wall.
ModelOpenstarlink mini wall mount
Starlink Mini wall mount
Starlink Mini wall mount as a parametric solid. Change a size, then download the STL.
- CNCOpen
cnc router projects
CNC tool tray
CNC tool tray as a parametric cut file. Set the stock and size, then download the SVG or DXF.
LaserOpenlaser cut shelf
Laser cut wall shelf
Laser cut wall shelf as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenstarlink mini pole mount
Starlink Mini pole mount
Starlink Mini pole mount as a parametric solid. Change a size, then download the STL.
