3D print
Prompt that made this
Bag clip. Two 80 × 18 × 8 mm jaws with a 1.2 mm sealing rib, joined by a 4 mm pin through 6 mm knuckles. A 12 mm tab on each jaw. Closed gap 0.4 mm. Prints as three separate parts.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Closing bags of food or other soft goods
Jaws pivot on a pin through interleaved knuckles; squeezing the flared tabs opens the jaws, and the 1.2 mm rib on jaw A presses the bag film against jaw B leaving a 0.4 mm closed gap.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
USB SSD stand
USB-C SSD stand: a 40 x 20 x 50 mm U-cradle tilted at 70° on a base, with a 12 mm slot and a cable notch in the back wall.
LaserForkpuzzle box
Laser cut puzzle box
Laser cut puzzle box as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForksteam frame controller stand
Steam Frame controller stand
Steam Frame controller stand as a parametric solid. Change a size, then download the STL.
- CNCFork
cnc charcuterie board
CNC charcuterie board
CNC charcuterie board as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Raspberry pi 3 case
Two-piece Raspberry Pi 3 Model B case with rounded outline, board standoffs, port and SD cutouts, and a vented snap-fit lid.
LaserForklaser cut shelf
Laser cut wall shelf
Laser cut wall shelf as a parametric cut file. Set the stock and size, then download the SVG or DXF.