3D print
Prompt that made this
USB-C SSD enclosure stand. A 40 × 20 × 50 mm U-cradle at 70°, 12 mm slot, cable notch in the back.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Holds a portable USB-C SSD upright on a desk, leaning back at 70° so the drive and its cable stay accessible.
The drive slides into the 12 mm slot between the leaning back wall and the lower front lip, rests on the cradle floor, and leans against the back wall. The USB-C plug sits at the floor end and its cable exits through the notch in the back wall. A wider base and a wedge under the floor carry the load and keep the stand from tipping.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
- CNCFork
cnc router projects
CNC tool tray
CNC tool tray as a parametric cut file. Set the stock and size, then download the SVG or DXF.
- LaserFork
wedding sign
Mr & Mrs wedding sign
Mr & Mrs wedding sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Phone stand
Desktop phone stand on a shield-shaped base (wide rounded back, sweeping curved shoulders, pointed front tip) with a front lip, a backward-leaning backrest a…
ModelForkmultiboard headphone holder
Multiboard headphone hook
Multiboard headphone hook as a parametric solid. Change a size, then download the STL.
- CNCFork
cnc charcuterie board
CNC charcuterie board
CNC charcuterie board as a parametric cut file. Set the stock and size, then download the SVG or DXF.
- LaserFork
welcome sign
Wedding welcome sign
Wedding welcome sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.