Laser cut wall shelf

Laser cut wall shelf as a parametric cut file. Set the stock and size, then download the SVG or DXF.

Laser
svg
Customize for free

Prompt that made this

Floating wall shelf for a laser cutter, 6 mm plywood, 400 mm wide, 120 mm deep. A back plate with two keyhole slots for screws, two triangular brackets with tabs that slot through the back plate, and a shelf board with matching slots that drops over the brackets. No glue needed.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.

Why this one

Most laser files for sale are one size for one sheet thickness, so the joints fail the moment your plywood is 3.2 mm. This one is parametric: set your stock and size, and every joint follows. Works with xTool, Glowforge and LightBurn.

The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.

How to cut

3 mm plywood or MDF unless noted. Measure the sheet and set the stock to it: joints are cut for the thickness you give. Engrave first, cut inner shapes before outlines.

Questions

Can I change the size or text of this laser cut wall shelf?
Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
What file do I get?
SVG cut files, one per sheet, with parts nested and kerf offset, plus DXF with one layer per operation. The SVG opens in LightBurn, xTool Creative Space and Glowforge.

More to make

  • Starlink mini wall mount, 3D printable modelModelOpen

    starlink mini wall mount

    Starlink Mini wall mount

    Starlink Mini wall mount as a parametric solid. Change a size, then download the STL.

  • Bag clip, 3D printable modelModelOpen

    Community

    Bag clip

    Two-jaw friction bag clip with sealing rib on one jaw, a finger tab on each jaw, five alternating 6 mm knuckles and a separate 4 mm hinge pin.

  • CNCOpen

    cnc sign

    CNC carved name sign

    CNC carved name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • LaserOpen

    welcome sign

    Wedding welcome sign

    Wedding welcome sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • Starlink mini pole mount, 3D printable modelModelOpen

    starlink mini pole mount

    Starlink Mini pole mount

    Starlink Mini pole mount as a parametric solid. Change a size, then download the STL.

  • USB SSD stand, 3D printable modelModelOpen

    Community

    USB SSD stand

    USB-C SSD stand: a 40 x 20 x 50 mm U-cradle tilted at 70° on a base, with a 12 mm slot and a cable notch in the back wall.

Browse creations