starlink mini wall mount
Prompt that made this
Wall mount for a Starlink Mini dish (298.5 × 259 × 38.5 mm): a wall plate with four countersunk 5 mm screw holes, and a cradle that holds the dish by its edges with 3 mm lips over the front on both long sides and the bottom and 1 mm clearance, open at the top so the dish slides in, tilted 20° up from the wall. Put the dish width, height and thickness and the tilt angle on parameters.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Starlink Mini mounts are sold for one pole, one rack or one angle. Here the dish size, the pole or crossbar and the tilt are sizes on the model: set them to your setup and download the STL.
The prompt under the model is the starting size. Fork it to move a wall, a hole, or a flag without spending a prompt.
How to print
PETG or ASA outdoors, 0.2 mm, 4 walls, 30% infill: PLA softens in the sun. Print one corner of the cradle first to check the dish fits.
Free tools for this STL
- STL volume and weight calculatorUpload an STL, 3MF, or OBJ and get its volume, surface area, size, and the filament weight and cost for PLA, PETG, ABS, and more.
- STL viewer onlineOpen STL files in your browser. Measure distances and holes, cut a section, check it is watertight, and see the print weight. No install, nothing uploaded.
- Convert STL to GLBFree STL to GLB converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the GLB.
- Convert STL to OBJFree STL to OBJ converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the OBJ.
Questions
- Can I change the size of this starlink mini wall mount?
- Yes. Sign up free, fork the part, and scrub any size. Parameter edits do not spend a prompt.
- What file do I get?
- STL for the slicer and GLB in the browser. STEP is on Maker and Pro.
More to make
ModelOpenCommunity
USB SSD stand
USB-C SSD stand: a 40 x 20 x 50 mm U-cradle tilted at 70° on a base, with a 12 mm slot and a cable notch in the back wall.
ModelOpenmultiboard spray can holder
Multiboard spray can holder
Multiboard spray can holder as a parametric solid. Change a size, then download the STL.
LaserOpenlaser cut tray
Laser cut serving tray
Laser cut serving tray as a parametric cut file. Set the stock and size, then download the SVG or DXF.
- CNCOpen
cnc charcuterie board
CNC charcuterie board
CNC charcuterie board as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenmultiboard tape holder
Multiboard tape holder
Multiboard tape holder as a parametric solid. Change a size, then download the STL.
