multiboard tape holder
Prompt that made this
Multiboard tape holder: a 2 × 2 cell back with Multiconnect slots and a 24 mm round arm 80 mm long from its lower half, ending in a 34 mm round stop 4 mm thick, for rolls of tape.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Multiboard is a 25 mm wall grid, and most of its accessories hang on Multiconnect: a connector in the board and a dovetail slot in the part. These parts have the slots cut to the Multiconnect profile on 25 mm centres, so they slide onto the connectors you already have, and the slots follow when you resize.
The prompt under the model is the starting size. Fork it to move a wall, a hole, or a flag without spending a prompt.
How to print
PLA or PETG, 0.2 mm, 3 walls on anything that holds tools. Print it standing up, as it hangs: the Multiconnect slots need no supports.
Free tools for this STL
- STL volume and weight calculatorUpload an STL, 3MF, or OBJ and get its volume, surface area, size, and the filament weight and cost for PLA, PETG, ABS, and more.
- STL viewer onlineOpen STL files in your browser. Measure distances and holes, cut a section, check it is watertight, and see the print weight. No install, nothing uploaded.
- Convert STL to GLBFree STL to GLB converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the GLB.
- Convert STL to OBJFree STL to OBJ converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the OBJ.
Questions
- Can I change the size of this multiboard tape holder?
- Yes. Sign up free, fork the part, and scrub any size. Parameter edits do not spend a prompt.
- What file do I get?
- STL for the slicer and GLB in the browser. STEP is on Maker and Pro.
More to make
ModelOpenCommunity
Desk cable clip
Printable cable clip with a C-slot snap channel and an adhesive-pad recess, plus an optional insert lid that turns it into a screw mount.
- CNCOpen
cnc sign
CNC carved name sign
CNC carved name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpensteam frame stand
Steam Frame stand
Steam Frame stand as a parametric solid. Change a size, then download the STL.
- LaserOpen
laser cut clock
Laser cut gear clock
Laser cut gear clock as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenCommunity
Sink sponge holder
Open-top sink sponge holder with 2 mm walls, a floor that slopes toward the front, five 5 mm drain slots, and two blind 30 mm suction-cup recesses on the bac…
- CNCOpen
cnc charcuterie board
CNC charcuterie board
CNC charcuterie board as a parametric cut file. Set the stock and size, then download the SVG or DXF.