3D print
Prompt that made this
Sink sponge holder, 90 × 60 × 45 mm, sloped floor, 5 mm drain slots, suction-cup recesses 30 mm on the back, 2 mm walls.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Holding a kitchen sponge on the side or back wall of a sink
The sponge sits in an open-top tray. The floor slopes forward and drains through slots so the sponge dries. Two shallow round recesses on the back wall seat suction cups to mount it to tile or the sink.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
- CNCFork
cnc router projects
CNC tool tray
CNC tool tray as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
USB SSD stand
USB-C SSD stand: a 40 x 20 x 50 mm U-cradle tilted at 70° on a base, with a 12 mm slot and a cable notch in the back wall.
- LaserFork
table numbers
Wedding table numbers
Wedding table numbers as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkstarlink mini roof mount
Starlink Mini roof rack mount
Starlink Mini roof rack mount as a parametric solid. Change a size, then download the STL.
- CNCFork
cnc charcuterie board
CNC charcuterie board
CNC charcuterie board as a parametric cut file. Set the stock and size, then download the SVG or DXF.
