Laser cut gear clock

Laser cut gear clock as a parametric cut file. Set the stock and size, then download the SVG or DXF.

Laser
svg
Customize for free

Prompt that made this

Wall clock face for a laser cutter, 3 mm plywood, 300 mm across, built as a ring of six meshing spur gears around a central 120 mm gear, 2 mm module, with the hours engraved on the outer gears. A 8 mm centre hole for a standard quartz clock movement and a hanging slot at the back.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the cut files (SVG and DXF), or fork it so every size on the right becomes editable — without spending a prompt.

Why this one

Most laser files for sale are one size for one sheet thickness, so the joints fail the moment your plywood is 3.2 mm. This one is parametric: set your stock and size, and every joint follows. Works with xTool, Glowforge and LightBurn.

The prompt under the model is the starting design. Fork it to change a size, the text, or the stock without spending a prompt.

How to cut

3 mm plywood or MDF unless noted. Measure the sheet and set the stock to it: joints are cut for the thickness you give. Engrave first, cut inner shapes before outlines.

Questions

Can I change the size or text of this laser cut gear clock?
Yes. Sign up free, fork the design, and change any size, the text, or the stock thickness. Parameter edits do not spend a prompt.
What file do I get?
SVG cut files, one per sheet, with parts nested and kerf offset, plus DXF with one layer per operation. The SVG opens in LightBurn, xTool Creative Space and Glowforge.

More to make

Browse creations